Reese 45002 TITAN RECEIVER Bedienungsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

Product No.

45002

You can take it with you.

SMALL PARTS

PACKAGE 45111

ELKHART, IN., OAKVILLE, ONT.

FORD PICK-UP

WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY

OCCUR DUE TO OVER TIGHTENING.

WARNING: DO NOT DRILL OR WELD TO THIS HITCH.

IMPORTANT NOTES

USE ONLY REESE SUPPLIED OR APPROVED BOLTS, LOCKNUTS,

AND WASHERS TO INSTALL THIS HITCH

TOOLS REQUIRED

3/4" SOCKET

3/4" WRENCH

1/2" DRILL

TORQUE WRENCH

1/2" SERRATED WASHER

1/2" LOCK WASHER

1/2" NUT

1/2" CARRIAGE BOLT

LARGE BOLT PLATE

TWO HOLE PLATE

SMALL BOLT PLATE

NOTE: THIS PRODUCT IS NOT RECOMMENDED

FOR USE ON A 1/2 TON VEHICLE.

1. Place the hitch up to the frame with the large hole in the hitch flange over the rivet head near the end of the frame.

Clamp the hitch in place.

2. Using the holes in the brackets as a guide, drill eight 1/2" holes into the truck frame.

(OVER)

For Installation Assistance or Technical Help, Call 1-800-758-0869

1 2

INSTALLATION INSTRUCTIONSProduct No.45002You can take it with you.SMALL PARTS PACKAGE 45111ELKHART, IN., OAKVILLE, ONT.FORD PICK-UPWARNING: DO NOT

3. Insert a 1/2" carriage bolt with the small bolt plate and the two hole plate through the rear hole in the frame. Install 1/2" serrated w

Keine Kommentare

Reese 45002 TITAN RECEIVER Bedienungsanleitung