Reese SWW-03 WEDGE KIT Bedienungsanleitung PDF herunterladen

SIDEWINDER

WEDGE

INSTALLATION INSTRUCTIONS

1. Verify the part number with shipping paper work. Verify that the wedge is named for your 5

wheel

hitch head or you have the universal wedge.

2. Verify that you also have two (2) 5/8 bolts and two (2) 5/8 lock washers.

3. With the truck unhooked from the unit bolt the wedge to the Sidewinder. The

wedge needs to be positioned with the narrow end towards the front of the

unit and the recessed area downward. The recessed area is for socket

head clearance to the bolts. Install bolts hand tight including the lock washers, then

slide the wedge to the rear most position of the slot.

Caution DO NOT position yourself or others under the trailer kingpin area or

between the truck and trailer during coupling or uncoupling. Serious injury or

death may occur.

If it is necessary to place any part of your body under the trailer or between truck

and trailer:

• All tires

MUST be blocked in front and behind AND

• Trailer landing gear

MUST be resting on firm ground AND

• Truck MUST be stationary, in park, with emergency brake on

4. Hook the truck to the unit. Back straight into the Sidewinder. Make sure hitch jaws close. Pull

forward slightly to align truck, Sidewinder and 5

wheel in a straight position. Set brakes, turn off truck

and lower trailer landing gear to the ground.

5. Slide wedge forward to make contact in to the 5

wheel hitch head. A slight tapping on the rear of the

wedge with a hammer may help with this step.

6. Torque the wedge bolts to 160 ft. lbs.

7. Unhook the truck from the unit. Apply a small amount of grease to sides of the wedge block. This will

allow a much easier hook-up.

8. Connect the Sidewinder to your hitch in back of the truck making sure hitch jaws close. Back straight

into Sidewinder. Caution DO NOT position yourself or others under the trailer kingpin area

during coupling or uncoupling. Serious injury or death may occur.

9. Sidewinder will be hard to turn by hand until it has at least 500 miles on unit.

Cequent Towing Products

47774 W. Anchor Court

Plymouth, MI 48170

Phone 866-352-7340

www.fifthairborne.com

PCN9891 SWWIN REV B 10/24/07

Inhaltsverzeichnis

Seite 1

SIDEWINDERTM WEDGEINSTALLATION INSTRUCTIONS 1. Verify the part number with shipping paper work. Verify that the wedge is named for your 5th wheel

Kommentare zu diesen Handbüchern

Keine Kommentare

Reese SWW-03 WEDGE KIT Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Reese SWW-03 WEDGE KIT herunter. Reese SWW-03 WEDGE KIT User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Reese SWW-03 WEDGE KIT