Reese 38211 CLASS V SUPER TITAN Bedienungsanleitung PDF herunterladen

Installation Instructions

20K HITCH

Part Numbers:

38211

38123N

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 15/16”

Drill Bits: None

1. Measure chassis width. If chassis width is under 34.75” then remove shim plates as required (Item 7). To remove shim plates:

remove fasteners (Item 4, 5 & 6). Discard spacer plates (Item 2). Reinstall fasteners and align side brackets. Snug up

fasteners.

2. Raise hitch into position. Weld hitch to chassis as shown above.

3. Torque hitch fasteners (Items 4,5 & 6) to:

Tighten 5/8” – 11 Grade 8 fasteners to 190 lb.-ft. (257.6 N*M)

Rev. D11-12-0838123NSheet 1 of 1

2007 Cequent Towing Products

Conical Washer 5/8”Qty. (16)

3/4” Hitch Pin with Lanyard Qty. (1)

Hex Bolt (5/8” – 11 x 2” Grade 8)Qty. (8)

HitchQty. (1)

Hex Nut (5/8” – 11 Grade 8)Qty. (8)

Spacer PlateQty. (4)

DrawbarQty. (1)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. A hitch or ball which has been damaged should be removed and replaced.

Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and

SAE J684.

20,000 LB (9072 Kg) Max Gross Trailer Weight

3,000 LB (1360.8 Kg.) Max Tongue Weight

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Drawbar must be used in the

Drop position only.

Drawbar Kit:

38124B

Fastener Kit: N/A

Form F206 Rev A 5605

Chassis

.25

Both Sides

.25

1.25

FRONT OF CHASSIS LOOKING REARWARD

DRIVERS SIDE OF CHASSIS LOOKING AT

THE PASSENGER SIDE

6” – 6.5”

Hitch (38211)

Slide hitch

against chassis.

27.0”

20.2”

4.8”

13.7”

10.5”

6.5”

25.4”

11.0”

.25”

Both Sides

Wrap Weld

Around Fillet

1.00”

20K HITCH 1

Inhaltsverzeichnis

Seite 1 - 20K HITCH

Installation Instructions20K HITCHPart Numbers:3821138123NHitch Shown In Proper PositionEquipment Required:Wrenches: 15/16”Drill Bits: None1. Measure

Kommentare zu diesen Handbüchern

Keine Kommentare

Reese 38211 CLASS V SUPER TITAN Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Reese 38211 CLASS V SUPER TITAN herunter. Reese 38211 CLASS V SUPER TITAN User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Reese 38211 CLASS V SUPER TITAN