Reese 61009 ROUND BAR W_HITCH BAR Bedienungsanleitung PDF herunterladen

REESE

You can take it with you.

SMALL PARTS

PACKAGES 66014K AND 61224

For Installation Assistance or Technical Help, Call 1-800-758-0869

INSTALLATION INSTRUCTIONS

Heavy Duty Round Bar Adjustable

Weight Distributing Hitches

ELKHART, IN., OAKVILLE, ONT.

DEALERS: Give these instructions to your customers.

INITIAL SET-UP

1. Line up tow vehicle and trailer on level pavement,

in straight-ahead position, uncoupled.

2. Level the trailer and measure and record the

distance from the ground to the top of the ball

socket (dimension Fig. 1).

3. Select a hitch ball with a diameter that matches

the trailer coupler size. The three most common

sizes are 1-7/8", 2", and 2-5/16". Select ball with

1-1/4" or 1" threaded shank that is V-5 rated equal

to or greater than trailer gross vehicle weight

rating (GVWR).

WARNING: Raised balls usually have reduced load

ratings. Ball rating MUST equal or exceed trailer GVWR.

4. Attach hitch ball to the ballmount (G). REESE standard height hitch balls

with 1-1/4" shanks are supplied with lock washers and nuts (If you must use

a 1” shank ball, use bushing 58109 (B) to reduce hole size in ballmount (G)

to 1”). Always use a lock washer and place washer next to nut. Unless other-

wise specified by ball manufacturer torque ball nut to 450 ft/lbs for 1-1/4" nut,

250 ft/lbs for 1" nut.

5. Some installations may require a longer hitch bar (D). Extended bumper guards, pickup truck "caps", or rear mounted spare tires

can limit turn angles unless a longer bar is used. Individual hitch bars (D) are available in various sizes.

6. Insert the hitch bar (D) into the hitch box and install a pull pin. Place ballmount (G) onto hitch bar and move up or down for proper

height. Hitch bar may be used in either the up or down position (see Fig. 2).

NOTE: Ball height should be greater than coupler height (measured in step 1) to compensate for vehicle "squat”

(approximately 3/4” to 1”).

Fig. 1

Fig. 2

* SHOWN WITH NEW INTEGRATED

CAM SPRING BARS

1 2 3 4

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

REESE You can take it with you. SMALL PARTS PACKAGES 66014K AND 61224 For Installation Assistance or Technical Help, Call 1-800-758-0869 INSTALLATION

Seite 2 - LINK ON HOOK

PRELIMINARY BALLMOUNT ADJUSTMENT 1. Insert 3/4" X 5" bolt (J) through 3/4" flat washer (F) and lower hole in ballmount and install flat

Seite 3 - WARNING:

Installation Instructions For Snap Up Bracket Provides For a Stronger Attachment to the Trailer Frame. TOOLS NEEDED: Drill Bits: 7/16”, 9/16” & ¼

Seite 4 - Plymouth, MI 48170

WARNINGS: LOADED BALL HEIGHT SHOULD NEVER BE GREATER THAN UNCOUPLED BALL HEIGHT. Front wheel overload and loss of rear wheel traction can result, and

Kommentare zu diesen Handbüchern

Keine Kommentare

Reese 61009 ROUND BAR W_HITCH BAR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Reese 61009 ROUND BAR W_HITCH BAR herunter. Reese 61009 ROUND BAR W_HITCH BAR User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Reese 61009 ROUND BAR W_HITCH BAR